Tipo Cella: | Bifacciale |
---|---|
Fascia di Potenza: | 5,16~5,4 Wp |
Regione: | Cina |
Excellent anti-PID performance to ensure stability of the module power
5%-20% power gain from rear side at suitable installation
High conversion efficiency, average cell efficiency (front side) is 21.8%, highest efficiency is 22.6%
Long term efficiency, stability and excellent reliability
Low breakage rate and Low LID rate
Good color uniformity
Numero Modello |
|
||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Caratteristiche del Prodotto | |||||||||||||||||
Tecnologia celle | Bifacciale | ||||||||||||||||
Dimesioni | 156,75×156,75 mm | ||||||||||||||||
Diagonale | 210±0,25 mm | ||||||||||||||||
Spessore Della Cella | 200 ± 20 µm | ||||||||||||||||
Superfice (fronte) (-) | |||||||||||||||||
Numero di Barre Collettrici | 5 | ||||||||||||||||
Larghezza della Barra Collettrice | 0,7±0,1 mm | ||||||||||||||||
Materiale della sbarra collettrice | Argento | ||||||||||||||||
Rivestimento Anti-Riflesso | Nitruro di silicio | ||||||||||||||||
Superfice (retro) (+) | |||||||||||||||||
Numero delle placche di saldatura | 4 | ||||||||||||||||
Larghezza delle Placche di Saldatura | 1,75±0,1 mm | ||||||||||||||||
Materiale delle placche di saldatura | Argento | ||||||||||||||||
Materiale superfice (retro) (BSF) | Alluminio | ||||||||||||||||
Dati elettrici in condizioni standard | |||||||||||||||||
Potenza Massima (Pmax) |
|
||||||||||||||||
Tensione alla Massima Potenza (Vmpp) |
|
||||||||||||||||
Corrente alla massima potenza (Impp) |
|
||||||||||||||||
Tensione a Vuoto (Voc) |
|
||||||||||||||||
Corrente di corto circuito (Isc) |
|
||||||||||||||||
Efficenza della Cella |
|
||||||||||||||||
Fattore di riempimento (FF) |
|
||||||||||||||||
Valutazioni di Temperatura | |||||||||||||||||
Coefficiente di Temperatura di Pmax | -0,41 %/˚C | ||||||||||||||||
Coefficiente di Temperatura di Voc | -0,32 %/˚C | ||||||||||||||||
Coefficiente di Temperatura di Isc | 0,04 %/˚C | ||||||||||||||||
Dipendenza dell’ intensita’ |
Intensita’
Voc
Vmpp
1000 W/m2
1,0
1,0
|
Lightway Solar was established in 2006,set up four companies in China mainland and owns two operating/sales companies in HongKong,with manufacturing factilities in Jiangsu/Jiangxi/Guangdong for solar cells/modules etc and global marketing/sales company in Shenzhen,our current annual production capacity is over 1.3GW for solar cell and solar module etc manufactured in CE/ISO/IEC/TUV/UL etc certificates.Lightway Solar devoted to offering clients a one-stop shop for high quality products and already recognized by many of our clients from all over the world up to 80 countries.