Directory Pannelli Solari
(12.349 Pannello di Serie / 46.095 Pannelli)

• Cutting-edge Half-cut PERC Cells

• Maximum efficiency of 21,06%

• Exceptional Anti-PID Performance

• Easy to Install

• Junction Box Protected with IP68

• 10-30% Additional Power Generation

• ZERO LID (Light Induced Degradation)

• Higher Reliability

• Better Weak Illumination Response

• Better Temperature Coefficient

Equipped with 144 split cells in a single module - twice more compared to a conventional solar module

Each half-cut cell produces the same amount of voltage as a standard cell but only half of the current

Module reaches power of up to 455W with a maximum efficiency of 20,9%

Designed to withstand harsh environmental conditions - wind loads (2.400 Pa) and snow loads (5.400 Pa)

• HJT 2,0 Technology

• -0,26%/°C Pmax temperature coefficient

• SMBB design with Half-Cut Technology

• Up to 90% Bifaciality

• Sealing with PIB-based sealant

• Quality Management System and Product Certification

• Advanced Half-Cut Technology

• 9 Busbars 166mm Monocrystalline Cells

• Up To 20,3% Efficiency

• 1.500V Allowed System Voltage

• IP 68 Rated Junction Box

• The genuine manufacturing expert of TOPCon technology

• 4A1 high rating from Dun & Bradstreet

• The world famous third-party warranty, 12-year material warranty and 25-year power warranty

• Conversion efficiency can reach 21,29%

• Optimal Choice for Ultra-large Power Plants

• ZERO LID

• PID Resistance

• Durability Against Extreme Environmental Conditions

• More Outstanding Low-Light Performance

• Enhanced Mechanical Load

• EL Full Inspection

• Up To 21,7% High Efficiency

• Enhanced Power Output With Optimized Module Layout

• Superior Performance With Anti-LeTID, Anti-PID, And Hot-Spot Protect Technologies

• Certified For High Snow (5.400 Pa) And Wind Loads (3.000 Pa)

• Excellent Low-Light And Temperature Behavior For Consistent Energy Yield

• Achieves up to 22% efficiency

• Power tolerance ranging from 0 to +5W

• Withstands 2.400Pa wind loads and 5.400Pa snow loads

• Complies with international QS ISO9.001 standards

• Boasts a protection rating of IP68

• Resilient Against Salt and Corrosion

• Highly resistant to PID in humid conditions

● Una delle aziende più innovative nel campo del solare

● Progettazione a cura del team in USA

● Le celle solari da 5BB/9BB/12BB possono ridurre la perdita di calore della corrente

● Tensione di sistema 1.500 V, basso costo del BOS

● Uscita di potenza ad alta efficienza

● Robusto e sicuro sotto vento e neve

● Resistente al sale e all'ammoniaca

The high module conversion efficiency of up to 21,28% by using innovative half-cell design and multi-busbar (MBB) cell technology

144 monocrystalline cells encased in a durable anodized aluminium frame

The module has passed the salt mist, ammonia and hail tests

The anodized aluminium frame allows the panel to withstand wind loads up to 2.400 Pa, and snow loads up to 5.400 Pa

Power range from 555W to 575W

High conversion efficiency up to 21,68%

PERC technology

Anodized aluminium alloy frame3,2-millimeter high-transmission tempered front glassHighly resistant to PID

effects12-year product warranty, 25-year linear power output warranty

High Efficiency 20%-23%

Wind/Snow Load 2.400Pa/5.400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature, and high humidity areas

• Durable Dual Glass Design

• Mono PERC Cells with Half-cut Technology

• Higher Power Output

• PID Resistant,

• High Efficiency up to 21,1%

• 0~+5W Positive Power Tolerance

• 12 Years Materials 25 Years Linear Output Warranty

• The glass-glass solar module with mono half-cut cells is especially well-suited for extreme climatic conditions

• 30-year manufacturer's warranty

• 30-year performance guarantee

• PID reduction through glass/glass technology

• Enhanced module performance through Half-Cut technology and carefully selected materials

• Incorporates SMBB Technology with Half-Cut Topcon Cells

• Utilizes HOT 2,0 Technology for Improved Performance

• Demonstrates Outstanding Low-Light Performance

• Enhances Mechanical Load Tolerance

• Exhibits Resistance to PID

• Elegant Full Black Design

• High-Efficiency TOPCon Technology

• Non-Destructive Cutting

• Bifacial Power Gain

• Lower BOS Cost & LCOE

• Up To 21,5% Peak Efficiency

• PID Resistant

• 30-Year Linear Power Output Warranty At 87,4%

• 15-Year Product Warranty

• 144 high-quality monocrystalline cells

• A conversion efficiency rating of up to 22,45%

• A total power output range of 570-to-580-watt peak

• Up to 5W positive power output tolerance

• An anodized aluminium alloy and a 3,2mm thick glass

• A 15-year product and 30-year performance warranty

• Linear attenuation of only 0,45% per year for 30 years

• 12-year warranty on product material and process

• Extensive product and system certifications

• Ensures reliable and stable power generation capacity

• Outstanding 21,3% conversion efficiency